SABER PROJECTS

OUR FOLIO OF ILLUMINATED SABER PROJECTS

NEW FX PROP SABER FOR SALES!
KR Saber Hero Hilt ROTJ / TLJ Luke Skywalker Lightsaber
This a newly installed lightsaber by “Cosmic Inter-Galactic LP”. Lightsaber Led lighting sequence for SoundFont 1 is custom set to mimic the movie.

Highlight of the construction:

  1. Naigon Electric Creation Soundboard “Igniter 3” Latest and one of the best soundboard in the market
  2.  NEC Cree RGRB LED
  3. Goth 3D Master Chassis “Brass / Metal Crystal Chamber”
  4. Panasonic Battery18650b 3400mah
  5.  2 x Real Crystal inside Crystal Chamber
  6.  28mm 2w 8 ohm Bass speaker
  7.  2.1mm charging port
  8.  2 x 5mm LED “Blue / Green 1 each”
  9.  1 x 5mm RGB LED
  10.  1 x KR PCB board in hilt control box
  11.  2 x “2x5x7mm LED in the control box”
  12.  PTFE AWG #30 & #32 military spec wires
  13. Blade plug with a real crystal that illuminates upon saber activation.
  14.  2 x SoundFont from Return of the Jedi movie. “R2-D2 bootup sound”
  15. 13 SoundFonts loaded into the soundboard.

Price is USD 1600 (Shipping and Paypal not included)
Contact us for interest in installation works : cigreplica@gmail.com

Kindly read our FAQ for information.
BARISS OFEE PROP SABER FX INSTALLATIONS
(KR Saber Run)

Specifications:

  • KR Barriss Offee Hilt
  • Plecter Labs Prizm V4
  •  CIG In-house made Led Switch
  • Tri-Cree RGRB
  • Panasonic 18650B
  • TCSS 28mm brass speaker
  • The Clone Wars sound fonts from CIG
  • CIG 3D Design & Printed Chassis

Contact us for interest in installation works : cigreplica@gmail.com

Kindly read our FAQ for information.

___________________________________________

OBI WAN KENOBI STATIC CRYSTAL DISPLAY PROP SABER
(Roman Props Run)

Specifications:

  • Static hilt & Crystal chamber by Rudy Pando
  • CIG tweaked PCB board
  • 5mm LEDs with strobe lighting function on real crystals

 

Contact us for interest in installation works : cigreplica@gmail.com

Kindly read our FAQ for information.


___________________________________________

RALPH MCQUARRIE CONCEPT DARTH VADER & DEAK STARKILLER PROP SABER
(Orbital Machining Run)

SOLD OUT!!

Specifications:

  • Plecter Labs NBV4
  • Tri-Cree RGRB
  • Panasonic 18650B -18mm speaker
  • Switch craft 2.1mm charging port
  • AWG 30 military spec wires


Contact us : cigreplica@gmail.com

Kindly read our FAQ for information.

___________________________________________

SATELE SHAN STAFF STAFF SABER FX INSTALLATION
(Helv’tica Run)

Specification:

– Sound Board IG2
– NEC cree RGRB X 2
– Battery Panasonic , 3.7 Volt
– Military Grade Wire
– Speaker 18mm in-house speaker
– Real Crystal
– Chamber Reveal with in-house 3D printed incorporated with 3DGoth Chassis
– Finishing: Chemical Wash with Light Polish

Note: FULLY SOLD OUT. THANKS

Contact us : cigreplica@gmail.com

Kindly read our FAQ for information.

 

FX Video:
1/3


2/3


3/3

 

___________________________________________

ASOKA (SOLO HOLD)
FX

Shoto (SOLD!)
– Sound Board NBV3
– Luxeon YYW LED
– Battery Nitecore 14500, 3.7 Volt
– Military Grade Wire
– Speaker 18mm in-house speaker
– Real Crystal
– Finishing: High Mirror Polished and Chrome
– Custom in-house Sound Font
– Chassis by 3DGoth
– Finishing: High Mirror Polished and Hard Anodized / Chrome
– 3mm LED

Shien
– Sound Board NBV3
– Luxeon GGW LED
– Battery Panasonic 1865B, 3.7 Volt
– Military Grade Wire
– Speaker 18mm in-house speaker
– Real Crystal
– Custom in-house Sound Font
– Chassis by 3DGoth
– Finishing: High Mirror Polished and Chrome
– 5mm LED

Contact us : cigreplica@gmail.com

LED being inserted directly to Crystal body. (As shown in picture gallery)

______________________________________________

LUMINARA UNDULI
(CIG)
FX, Finishing: Mirror Polished and Full Gold Plating

Contact us : cigreplica@gmail.com
Kindly read our FAQ for information.

 

 

PLO KOON
(CIG)
FX, Finishing: Mirror Polished, Full Gold Plating and Nickle Plated

Contact us : cigreplica@gmail.com
Kindly read our FAQ for information.

 

1371total visits,1visits today